| |
|
|
Manual Spindle 2 KW
- Spindle Power 2 KW
- Maximum Speed 18,000 RPM
- Collet size ER25
- Max. 16 mm (5/8") tool diameter
|
|
| |
|
|
| |
|
|
Manual Spindle 5.6 KW
- Spindle Power 5.6 KW
- Maximum Speed 24,000 RPM
- Ceramic bearings
- Collet size ER25
- Max. 16 mm (5/8") tool diameter
|
|
| |
|
|
| |
|
|
Manual Spindle 9.5 KW
- Spindle Power 9.5 KW
- Maximum Speed 18,000 RPM
- Ceramic bearings
- Collet size ER40
- Max. 26 mm (1-1/4") tool diameter
|
|
| |
|
|
| |
 |
|
Manual Spindle 1.5 KW, 40,000 RPM
- Spindle Power 1.5 KW
- Maximum Speed 40,000 RPM
- Ceramic bearings
- Compressed air cooling, optional liquid cooling
- Collet size ER20
- Max. 13 mm (1/2") tool diameter
|
|
| |
|
|
| |
|
|
Automatic Toolchange Spindle 8 KW
- Spindle Power 8 KW
- Maximum Speed 24,000 RPM
- Ceramic bearings
- Toolholder ISO-30
- Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders
|
|
| |
|
|
| |
|
|
Automatic Toolchange Spindle 12 KW
- Spindle Power 12 KW (S6) / 10 KW (S1)
- Maximum Speed 24,000 RPM
- Ceramic bearings
- Toolholder HSK-63F
- Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders
|
|
| |
|
|
| |
|
|
Automatic Toolchange Spindle 18 KW
- Spindle Power 18 KW (S6) / 16 KW (S1)
- Maximum Speed 24,000 RPM
- Liquid cooled
- Ceramic bearings
- Toolholder HSK-63F
- Max. 26 mm (1 1/4") tool diameter with ER-40 tool holders
- Ridgid-tapping (optional)
|
|
| |
|
|
| |
 |
|
Automatic Toolchange Spindle 1.5 KW, 40,000 RPM
- Spindle Power 1.5 KW
- Maximum Speed 40,000 RPM
- Ceramic bearings
- Compressed air cooling, optional liquid cooling
- Toolholder ISO-20, optional HSK-32E
|
|
| |
|
|
| |
 |
|
Automatic Toolchange Spindle 8 KW, 36,000 RPM
- Spindle Power 8 KW (S6) / 6.5 KW (S1)
- Maximum Speed 36,000 RPM
- Ceramic bearings
- Liquid cooling
- Toolholder HSK-40E
- Ridgid-tapping (optional)
|
|
| |
|
|
| |
 |
|
Beltdriven Manual / Automatic Toolchange Spindle
- Spindle Power 15 KW (S6) / 11 KW (S1)
- Maximum Speed 6,000 RPM, optional 8,000 / 10,000 / 12,000 RPM
- Toolholder BT-40, optional BT-50 / SK-40 / SK-50 / HSK-63A / HSK-100A
- Oil-cooling (optional)
- Ridgid-tapping (optional)
|
|
| |
|
|
| |
 |
|
HF Spindle for High-Speed-Engraving
- Spindle Power 0.24 KW (S6) / 0.18 KW (S1)
- Maximum Speed 60,000 RPM
- Ceramic bearings
- Manual Toolchange
- Maximum Tooldiameter 3.5 mm / 1/8"
- Floating nose with adjustable depth
(adjustable depth range 7 mm in 0.02 mm steps)
- Taper run out <1μm
|
|
